Detail Specification:
China CHC T3 RTK GPS with Internal and External Radio for surveying
instrument
Dual-battery, longer time measurement
When RTK is measured outdoors, the battery power determines the
time and efficiency of the work.Battery life is a perennial
problem.T3 USES intelligent dual-battery design, with a total of
6800mAh for two batteries, which can switch power mode according to
the battery condition.
Waterproof unafraid of condensation
Let T3 become a "breathing" RTK receiver, Make the T3 an RTK
receiver that can 'breathe'. Compared to a completely sealed
receiver, T3 can drain water molecules through a waterproof and
breathable membrane to avoid condensation inside the device and
water accumulation
| Project | Details | Performance Data |
| characteristic | Satellite tracking | Beidou |
| Operating system | LINUX operating system |
| Dry-Tec | Yes |
| Initialization time | 5s |
| Data output rate | Maximum 50 hz |
Initialization
reliability | >99.99% |
| Appearance | Appearance | Streamline cylinders. |
| Keys | 1 power button and 1 static switch key. |
| Indicator light | A differential signal lamp. |
| 1 satellite lamp |
| 1 data collection lamp. |
| 2 power indicator lights. |
| 1 WiFi indicator light. |
| Accuracy | static accuracy | Plane accuracy:±(2.5+ 0.5×10-6×D) mm |
| Elevation accuracy:±(5+0.5×10-6×D) mm |
| RTK accuracy | Plane accuracy:±(8 + 1×10-6×D) mm |
| Elevation accuracy:±(15+ 1×10-6×D) mm |
| Single machine | 1.5m |
| Code difference | Plane accuracy:±0.25m+1ppm |
| Elevation accuracy:±0.50m+1ppm |
Electrification
parameter | power consumption | | 3.2W |
| Battery capacity | | 3400mAh*2*7.4V=50.32Wh |
| Battery technology | | Dual battery intelligent power supply system. | | | |
| Working time | | RTK mode 12 hours, external direct current,
dual battery power automatic switching. |
| external power source | 9-36V DC |
Physical
properties | size | 13.5cm×10.6cm |
| Weight | ≤1Kg |
| material | AZ91D magnesium alloy |
| Working temperature | -45ºC~+75ºC |
| Storage temperature | -55ºC~+85ºC |
| Wet degree | 100% no condensation |
Waterproof and
dustproof | IP68 |
| Impact vibration | IK08 |
| Communications | I/O port | 1 external UHF antenna port |
| 1 seven-pin LEMO data port. |
| 1 mini USB data transmission port. |
| 1 micro SIM card slot |
| Difference format | | RTCM3.2,RTCM3.X,CMR,CMR+,
CMRx,RTCM2.3 |
| Built-in radio | Power: 0.1W-2W adjustable. |
| Frequency: 450-470mhz |
| Protocol: CHC |
| WiFi | 802.11 B/G/N |
| bluetooth | BT 4.0, which is compatible with bt2.x,
supports the Win/Android/IOS system. |
| NFC | controller and host touch can make the
wifi automatic connection |
We can use the different international express company, usually,
our first choice is DHL. if you have specified requirement , please inform us before the order.
Our Services
your inquiry will be replied within 24 hours, we welcome your email
and call at any time.
our products are original and 100% new. and they will be carefully
checked before we ship them out.
we provide one year quality warranty, within one year since you
bought the products from us, you will get our technology support.
Company Information
Shanghai Galxy International Trade company, Ltd. combining with
developing, researching and producing. Our company is located in
Pudong Developing Zone, and has two subsidiary companies: Shanghai
Galaxy International Trade Co., Ltd. and Mato Opto-electrical
High-tech Company. Our company has researching center and factory
in Changzhou.
Our main products are as following: total station, electronic
theodolite, automatic level, laser level, rotation laser, GPS,
distance laser sensor and accessories, such as tripod, prism, pole,
staff and USB cable for total station. Our company designs software
for many domestic and oversea factories, for example, Boif, TJOP,
Stanley, and Cst-Berger. We have powerful capacity in technical
research, and the products we designed have advanced technology and
steady performance. The non-prism total station and the absolute
coding measure instrument we developed and produced have very
competitive points in the measure instrument market.
We expect that we could cooperate with more business partners from
all over the world. In addition, we can do OEM service for
companies or dealers that want to find better producers in China.
Our goal is to produce the best surveying instruments in the world.
Our target is to globalize the market, internationalize the quality
and maximize the profit!
